The horizontal and inclination modular belt conveyors of type TMB B/L (where B - belt width and L - belt length) can be placed on the basic of the mining works or can be suspended by the creeper that is rolling on the monorail..
Their metallic construction is made of rectangular pipe and the surfaces protection can be made with coating painting or with thermal galvanizing.
The conveyors length is variable (between 6 and 100 m), being made from parts having the length 1, 2 and 3 m.
By replacing the cross bars there can be made different gauges of the conveyors for using the belts with the widths between 500 andi 1200 mm.
The transport of materials is made by using the uninflammable rubber belts.
To action the conveyors can be made both with motor - reducers and motor - drums, and the motors can be made normally or anti-explosive.   To start and to stop the belt conveyors can be made by using an inter-blocking supply schedule. In case of injury, the conveyors can be stopped at any point of their route..
The belt conveyors are equipped with a loading funnel, with external and internal wipers, with extension screws for the return drum and with suspending devices.
These conveyors can be used both underground and ground, into the pits, into the deposits of building materials, etc.

Characteristics and functional - constructive variants:

Belt width (mm)	500	650	800	1000	1200
*Operation power (Kw)	3 - 37
Engine drum	Yes	No	No	No	No
Motor-reducer	Yes	Yes	Yes	Yes	Yes
Diameter of driving drum (mm)	320	400	500	500	500
Diameter of return drum (mm)	240	320	400	400	500
Upper rolls - no. - degree - D x L (mm)	3 -30 89 x 200	3 -30 89 x 250	3 -30 89 x 315	3 -30 108 x 380	3 -30 133 x 465
Inferior roll D x L (mm)	89 x 600	89 x 750	89 x 950	108 x 1150	133 x 1400

Note: * It is chosen depending on the belt length, the belt width, the belt speed and the inclination of the belt conveyor   (upgrade / downgrade)